Site Information

 Loading... Please wait...
  • ELCON PFC1500 Battery Charger Product Family
  • Image 2
  • Image 3

ELCON PFC1500 12VDC Charger 110v/220v

$575.00
SKU:
TCCH-24-40 12
Quantity:

Product Description

ELCON PFC1500 Charger12VDC 120/240V

PFC 1500 Battery Charger (40A Model Series w/SP50-Type Connector)

 

Advantages

1. Internal integrated PFC, no pollution to electric network, minimizes disturbance on electric network from heavy current.
2. Wide input voltage range AC85V~AC265V available for worldwide requirements, convenient for electric-network fluctuation and vehicles exportation.
3. High efficiency, above 93%, while traditional chargers can meet only about 80% efficiency.
4. Intelligent temperature compensation function in the charging process, preventing damage to the battery caused by charge-off or charge due, greatly extending the lifespan of the battery.
5. Fully-sealed and water-proof, protection class IP46. Shock resistance treatment made inside makes vibration-proof level up to SAEJ1378 that can fully meet the standard of automobile appliance usage.
6. Available for various kind of batteries like Lead-Acid, LiFePO4 etc., Flexible and programmable charging module. Ability to select 10 different Amp Hour or Cell Count settings. Equipped with CAN communication interface to realize real-time communication with BMS. 

 

PFC1500 Model Family Specifications

Spec
Model
Output Voltage
-Nominal 
Output Voltage
-Maximum
230vac
Output Current
-Maximum
230vac
TCCH-24-40
24V
34V
40A
TCCH-36-33
36V
51V
33A
TCCH-48-25
48V
65V
25A
TCCH-60-20
60V
89V
20A
TCCH-72-16
72V
103V
16A
TCCH-96-12
96V
130V
12A
TCCH-120-10
120V
161V
10A
TCCH-144-08
144V
203V
8A
TCCH-156-07
156V
217V
7A
TCCH-192-06
192V
258V
6.2A
TCCH-240-05 240V 320V 5A

Note: red = call for availability, black = special order.

Technical Features

AC Input Voltage Range
AC85V~AC265V
AC Input Frequency
45~65 Hz
AC Power Factor
≥0.98
Full Load Efficiency
≥93
Mechanical Shock &
Vibration Resistance Level
Conformance to
SAEJ1378 Standard
EnvironmentalEnclosure
IP46
Operating Temperature
-40 +55℃
Storage Temperature
-40 +100℃
Mechanical Dimensions
352mm×195mm×139mm
Net Weight
7.07kg

LED Indicator

Red-Green flash
(one second interval)
Battery Disconnected
Red flash
(three seconds interval)
Repair Battery
Red flash
(one second interval)
<80% Charge Indicator
Yellow flash
(one second interval)
>80% Charge Indicator
Green flash
(one second interval)
100% Charge Indicator
 
Protection Features
 
1. Thermal Self-Protection: When the internal temperature of the charger exceeds 75, the charging current will reduce automatically. If exceeds 85℃, the charger will shutdown protectively. When the internal temperature drops, it will resume charging automatically. 
2. Short-circuit Protection: When the charger encounters unexpected short circuit across the output, charging will automatically stop. When fault removes, the charger will re-start in 10 seconds.
3. Reverse Connection Protection: When the battery is polarity reversed, the charger will disconnect the internal circuit and the battery, the charging will stop and avoid been damaged.
4. Input Low-voltage Protection: When the input AC Voltage is lower than 85V, the charger will shutdown protectively and automatically resume working after the voltage is normal again.

Making user selection (1-10)

1. There are 10 user selections of Amp Hour (battery size) or Cell Count (number of batteries) available.
2. When the charger is plugged in, the red LED flashes a number of times to indicate the present selection.
3. To change the selection, disconnect AC power, lift the bottom right corner of the Model Number label and hold down the black plastic button while connecting the AC power. Count the number of green flashes and release the button at the desired selection (1-10). The red LED will flash the same number of times to confirm your selection
 
Alarms

 
LED Flashing SequenceOne Cycle
Indication
1
R G _ _ _ _ _ _
Wrong Battery
2
R G R _ _ _ _ _
Overcharged
3
R G R G _ _ _ _
Battery Overheated
4
R G R G R _ _ _
Incorrect AC Input Voltage
5
R G R G R G _ _
External Thermal Sensor Fault
6
R G R G R G R _
Communication Interface Fault
7
G R _ _ _ _ _ _
Charger Overheated
8
G R G _ _ _ _ _
Charger Relay FaultRepair
9
G R G R _ _ _ _
Charger Fault; Repair
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Note:
1. R—red    G—green
2. “_” denotes one second stop
3. Above LED flashing sequence is one cycle, the LED will flash repeatedly when in fault.
 
Installation & Safety Instructions
 
1.Preferably the charger should be installed in the vertical position with radiator fins vertical. A space of 10cm above ground should be open to ensure airflow. Never install in the vertical position with fins facing down.
2. Ensure all heat dissipating parts are not obstructed to avoid overheating. Do not put the battery charger near any heat sources. Make sure that free space around the charger is enough to provide adequate ventilation & easy cable socket access.
3. Ensure the consistency between the alternating supply voltage and the allowable voltage input of the charger, please approach a retailer or local Power Utility for enquiry.
4. For safety and electromagnetic compatibility, the battery charger has a 3-prong plug that apply tothe socket with grounded outlet.
5. If you are using an extension cord for alternating current power supply, make sure that it is affordable to the maximum input current.
6. The voltage-drop between the charger and connection wire of the battery should be as less than 1% of the battery voltage as it can. Otherwise, it affects charging effect possibly. Meanwhile, the diameter of the wire should satisfy the output current value.
7.The thermal compensation probe for the battery voltage must be placed in the area of the highest battery temperature, such as between two batteries near the center of the pack.
8.If the charger does not work correctly or if it has been damaged, unplug it immediately from the supply socket, from the battery and contact a retailer.
9. Do not try to service the charger yourself. Opening the cover may expose you to shock or other hazards.
10. To avoid damaging the power cord, do not put anything on it or place it where it will be walked on. If the cord becomes damaged or frayed, replace it immediately.

 

 

 

 

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Click the button below to add the ELCON PFC1500 12VDC Charger 110v/220v to your wish list.